| Housing Material | 304 STAINLESS STEEL |
|---|---|
| Contact Resistance | 10 MΩ |
| Sealing Method | Glass To Metal Seal |
| Connector Type | Single Pin |
| Thermal Cycle | -60°C ~ +100°C |
| Sealingtype | Hermetic |
|---|---|
| Insulation Resistance | 500MΩ Min |
| OperatiomCurrent | 30AMAX |
| Insulationmaterial | CERAMIC |
| High Sealing Performance | 2.5MPa Does Not Leak |
| Kontaktplattierung | Elektroless Nickel |
|---|---|
| Leckageprüfung | 22 MPa mit N2, kein Leck |
| Typ des Steckers | Hermetisch |
| Produktbezeichnung | Hermetische Wassertank-Verbindungsstücke |
| Isolator-Widerstand | 100MΩ@500VDC |
| Thickness | 1-5μm |
|---|---|
| Sealing Method | Hermetic Sealing |
| Working Temperature | -40℃-150℃ |
| Body Material | Cold Rolled Steel |
| Contact Plating | Gold |
| Current Rating | 20A |
|---|---|
| Salt Spray Resistance | 48h |
| Contact Resistance | 2mΩ |
| Burst Test | 5.0MPa |
| Sealing Method | Hermetic Seal |
| Temperatur-Bewertung | 105 Grad |
|---|---|
| Durchschlagsfestigkeit | 2500VAC |
| Erschütterungs-Widerstand | 20G |
| Durchgangswiderstand | 2mΩ |
| Nennspannung | 1000V |
| Mounting Style | Screw |
|---|---|
| Burst Test | 5.0MPa |
| Sealing Method | Hermetic Seal |
| Glass Material | ELAN #48 |
| Operating Temperature | Up To 150°C |
| Body | 316L Stainless Steel |
|---|---|
| Surfacefinish | Smooth And Clean For Optimal Sealing |
| Pin Material | Alloy 52 |
| Manufacturingprocess | Fusing Glass To Metal Under Controlled Conditions |
| Application | Electrical Feedthroughs, Vacuum Tubes, Sensors |
| Typ der Montage | Plattenberg |
|---|---|
| Produktbezeichnung | Hermetisches EV-Verbindungsstück |
| Isolatormaterial | Glas- und keramisch |
| Typ des Steckers | Hermetisch |
| Verbindungsstück-Reihe | EV |
| Sealing Method | Glass-to-Metal Or Ceramic-to-Metal |
|---|---|
| Cable Length | Customizable |
| Dielectric Withstanding Voltage | 1,500 VAC |
| Mounting Style | Flange, Threaded, Weldable |
| Insulation Material | Glass Or Ceramic |